芬诺FEANOR--用QMSOFT 更新ZEISS ULM 长度测量仪器

Update of ZEISS ULM  length measurement machines with QMSOFT

Keywords: length calibration machines, ZEISS ULM, Microrep, Heidenhain, aus Jena, update, calibration of gauges, thread rings and gauges, software for calibration, update of older length calibration machines

Author: Luca Bochese, FEANOR Italy-Estonia, QQ 873993643
Date: 2008-06-25
用QMSOFT 更新ZEISS ULM 长度测量仪器

作者： Luca Bochese ， feanor爱沙尼亚， QQ： 873993643
日期： 2008年7月22日

Feanor is a global company performing applied research and providing services in metrology and measurement instruments since 1990. The information contained in this article is useful for all users of older ZEISS length measurement machines, including calibration laboratories, which need to update the software for the management of their measuring instruments. 

　　芬诺FEANOR是一个全球性的公司，创立于1990年，进行应用研究和提供计量和测量仪器的服务。本文所述技术信息对所有ZEISS ULM长度测量仪器的老客户很有益处，包括校准实验室，它需要更新软件管理自己的测量仪器。

The ease of use and the impressive number of standards included in QMSOFT offers advantages such as fast and custom calibration of dial gauges, accurate calibration of thread rings using T probes and a three point contact (instead of two, as normally performed with these machines) by positioning the thread ring with a vertical axis, no need of paper, e-calibration services and database sharing with customers, and many others. The company which installed this system can now save about 35.000 EUR per year, this being the cost for calibration of thread rings by an external calibration laboratory.

　　它使用方便，在QMSOFT中有数目可观的标准，它的优势体现在，比如，快速和自定义的标定拨号计，精确标定螺纹环，用T探头和 3点接触（而不是两个，像通常的机器那样）通过垂直轴定位螺纹环，无需纸张，提供电子校正服务和数据库与客户共享服务，和许多其他服务。该公司安装这个 系统现在可以节省约35.000欧元每年，相当于一个由外部校准实验室校准螺纹环提供的成本。

 
Picture 1: Older ZEISS ULM length measuring machine can now be transformed into a fast and efficient length calibration machine with the powerful options of QMSOFT gauge management software
图片1 ：旧版的ZEISS ULM 长度测量仪器现在可以转化为一种快速有效的长度校准机通过选择强大的QMSOFT衡量管理软件

The main advantages of QMSOFT gauge management software:
• Fast operation and ease of use
• Complete and updated standards
• Calibration of thread gauges with 3 probe procedure (more accurate) and Berndt or vectorial evaluation formulas

• QMSOFT衡量管理软件的主要优点：
•运作快速和使用简单
•完整和更新的标准
•校准螺纹压力表与三探针程序（更准确）和Berndt或矢量评价公式

Conversion of the original Zeiss measuring system
Using a special interface-box, it is now possible to connect directly the original Zeiss measuring system of the ‘aus Jena’ machine to a modern Heidenhain IK220 card (PCI card with two sockets).

　　原ZEISS测量系统转换使用一个特殊的界面中，现在有可能直接连接原ZEISS测量系统'‘aus Jena '机到现代海德汉IK220卡（ PCI卡用两个插座） 。

Note: Older computers used an IK 121 card on ISA bus, when required, it is still possible although not suggested, to use a IK 121 card on ISA bus and QMSOFT16 bit version. In that case, the card is not automatically recognized by the OS, and is therefore necessary to check PIN address 320, 330,340 or 350 and enter this information in the QMSOFT glass scale setting options, as well as the glass scale resolution in 20 or 8 μm.

注：老式的电脑，一IK的121卡ISA总线，在需要时，它仍有可能，虽然没有建议，使用IK的121卡ISA总线和qmsoft16位元版本。在 这种情况下，该卡是不会自动承认的操作系统，因此，有必要检查引脚地址320 ， 350或330340 ，并输入此信息，在qmsoft玻璃规模设定选项，以及作为玻璃规模决议在20年或8 μm。

This solution with IK220 PCI allows the use of both versions of  QMSOFT 16 bit and QMSOFT 32 bit, without the need of using the original AE101 (H or L) display unit.
The information previously displayed on Zeiss AE101 interface (MIN, MAX, NEG, SET, …) is now displayed directly on the PC monitor.

　　这个用ik220PCI的解决方案允许使用两个版本的QMSOFT 16位和32位，而不需要使用原来的ae101 （ h或升）显示单元。

　　以前仅显示在AE101接口的资料（Min，Max，NEG，SET … … ）现在可以直接显示在PC监视器上。

Picture 2: The original Feinmess AE 101 Interface is no longer needed, when connecting the measuring machine to the Heidenhain PCI counter card. The functions of the display are then performed by the QMSOFT display software.

图片2 ：原Feinmess AE 101接口，就不再需要了，当把测量仪器和海德汉的PCI卡连接起来时。职能展示是由QMSOFT显示软件完成的。

Conversion Interface box
The cable of the aus Jena ZEISS ULM machine is connected to a special interface box, which is then connected to the IK220 in the PC slot.
When installing the drivers, with different procedures according to Windows 2000, XP or Vista, the IK220 card address will be automatically recognized (no pin setting).
The original signal is converted and displayed, the only required setting are the setup of the measurement channel (normally nr. 1) and the glass scale resolution in 20, 10, 8 or 2 μm. This can be easily performed by measuring a 10 mm block gauge.

转换接口箱
aus Jena ZEISS ULM的网线 是连接到一个特别的接口框，然后连接到ik220电脑插槽。
安装驱动时，根据Windows 2000 ， XP或Vista不同的程序 ， ik220卡地址将被自动识别（无引脚设置） 。
原始信号的转换和显示，只需要设置安装的测量通道（通常年nr. 1 ）和玻璃度量分辨率在20 ， 10 ， 8或2 μ m。
这可以很容易的通过测量一10毫米的仪表来展示。

Measurement pressure
This system can be easily applied to all machines with mechanical presetting of measuring force (spring or deadweight). For all machines with force presetting via software, it might be necessary to keep the machine management software in background. This happens, as an example, with SIP Genevoise series 550 M machines, which need their own LMC software running in background.

压力测量
　　这个系统可以很容易地适用于所有的带有测量力的机械预先装置（弹簧或是重量）机器。对所有通过软件预置力的机器 ，可能有必要把机器管理软件保持在背景下。这种情况下，作为一个例子，与SIP的genevoise一系列550m机器，需要他们自己的LMC运行的软件的背景。

Temperature compensation
Drivers for most temperature sensors are included. A general RS232 setting option allows connection of other sensors, if required by unstable environment condition (which should generally be avoided).

温度补偿
　　对于大多数温度传感器，驱动均包括在内。一般的RS232设置选项允许连接其他传感器，如有需要，如果不稳定的环境条件需要的话（一般应避免） 。

Calibration of dial gauges
Calibration of all types dial gauges can be performed very quickly and easily. All included standards (US and European standards, including also Japanese, Korean and Australian) are given at the end of this article

拨号压力表校准
　　校准所有类型的拨号压力表可以非常迅速和容易的执行。所有列入标准（美国和欧洲的标准，其中还包括日本，韩国和澳大利亚） ，均在本文章最后呈现。

The basic QMSOFT display contains all needed functions for calibration of different types of gauges
基本的QMSOFT 显示包含所有需要的功能来校准不同类型的压力表。

Example of calculation of parameters of thread standard values (minimum, maximum, wear or external, mean an internal diameter) , for a metric M10 thread plug gauge, pitch 1.5 mm, tolerance class 6H, according to DIN German standard

　　例如计算参数的螺纹标准值（最低，最高，磨损或外部，是指一个内部直径） ，为M10的公制螺纹塞规，螺距1.5毫米，宽容级6小时，按照DIN德国标准
 

In this example, two measurement at 0° and 90° are performed on a 10.410 mm plain plug gauge, on two different sections of the gauge, by the three wire method
在这个例子中，两种测量在0 °和90 °是在一个10.410mm平原塞规，由三线的方法，在两个不同的部分规范。

QMSOFT - 软件技术实现对检定和校准的过程控制

Software for management and calibration of measurement instruments, including updated international standards
软件管理和校准测量仪器，其中包括最新的国际标准

The main shell of QMSOFT is divided in four sections: left for the measuring modules (inspection programs) for different types of instruments to be calibrated, the database, the calibration devices used, and other software tools
QMSOFT的主体分为四个部分：左为测量模块（检验程序） ，为不同类型的仪器进行校正，数据库，标定设备使用，和其他的软件工具

QMSOFT can be used with all length measuring instruments, including following well-known models from different manufacturers:
这个软件可以用在所有长度测量仪器，其中包括：

• SIP - 300, 300M, 550M, 750M
• Brown&Sharpe TESA - TESA UPC, Etalon POLO
• Mahr Federal - 828a, 828 PC, 828 UN, Optimar 100, Millitron 1240 e 1501IC, PLM 600
• Zeiss aus Jena - ULM 600 (AE1IH/Heidenhain), ULM Opal 600, Opal 1000
• Steinmeyer Feinmess Suhl - KLM-60.01, LM-300.01, UMP-2, EMP-II
• Trimos - TULM RS232/Heidenhain, THV mini, LabConcept, TELMA, TELA
• Pratt & Whitney - Supermicrometer, P&W Labmaster
• Sylvac - Dial gauge calibrator, D 80, D 100, Opto RS
• Helios - Com, Unitron, Com Supra, Linear, UMG 50
• Microrep - DMS 680
• Cary - Carylabor

QMSOFT has many different modules, which allow high flexibility and possibility to adapt to your calibration requirements:
QMSOFT 有很多不同的模块，灵活性高，适应性强，可适合你的校准要求。

1. Gauge database DABAQ4W (command shell). Gauge management
DABAQ4W 软件技术实现对检定和校准的过程控制
 

The database screen indicates which gauges or instruments need to be calibrated and gives their basic parameters. The database is fully customizable and can be used to define the structure of any type of new measuring device (electrical, force, torque, temperature, torque, pressure,…)

　　数据库的屏幕显示，其中压力表或仪器需要加以校准并给出了他们的基本参数。该数据库是完全自定义，可以用来界定结构，界定任何类型的新的测量装置（电气，力矩，扭矩，温度，扭矩，压力， … … ）

2. LEHRM4W for calibration of plain rings, plug gages and snap gages according to following standards:
LEHRM4W 校准片面环，插头片，根据以下标准：

- DIN ISO 286 – 1环规德国标准
- DIN ISO 286 – 2环规德国标准
- British standard BS 969 -环规英国标准
- ANSI/ASME B89.1.6M - 1984 -环规英国标准
- Norme Française NF E 02-202 (GE40-001N) -环规法国标准
- Master Rings BS 4064:1966 and BS 4065:1966  环规英国标准
- Master Rings Norme Française NF E 11-011环规法国标准

Screen for plain gages selection

3. GEWIND4W for calibration of thread gages and rings according to following standards.
GEWIND4W 为校准线片及环，根据以下标准：

- ISO Metric threads ISO DIN ISO 1502 (DIN 13) 国际标准化组织公制螺纹
- ISO Metric threads ANSI B.1.16M ANSI标准化组织公制螺纹
- Trapezoidal ISO metric threads DIN 103  梯形国际标准化组织度量 线程
- Unified threads and thread gages ANSI ASME B1.1 and B 1.2 标准
- Thread Gauges for Unified threads BS 919 标准
- Gauges for pipe threads DIN ISO 228 国际标准化组织计管螺纹
- Steel conduit threads DIN 40430, DIN 40431 标准
- Knuckle threads (Rundgewinde) - DIN 405标准
- Buttress threads and gauges (Sägegewinde), DIN 513 and factory standard
- Gauges for wire thread inserts for metric threads, DIN 8140 标准
- Gages for threads Whitworth BS 84 / BS 919 part 2
- NPSM pipe threads, ANSI/ASME 1.20.1
- Aerospace MJ Threads, DIN ISO 5855 - 对于应用在航天
- Gauges for Metric and Unified threads Böllhof factory standard
- Threads for valves and tires DIN 7756 and ETRTO V.7
- Metric threads NF E 03-152/163 (GE40-010N)
- Unified threads CNOMO GE40-008N (PSA, Renault) 法国标准
- ACME threads ANSI B1.5 – 1988 标准
- Stub-ACME threads ANSI B1.8 – 1988 标准
- Buttress threads 7°/45°, ANSI B1.9 – 1973 标准
- Hot-dip galvanized threads DIN ISO 965:2002 标准

4. MESSF4W for calibration of dial gauges, precision dial gauges and test dial indicators according to following standards:
MESSF4W 标定拨号仪表 (百分表千分表系列), 精密拨号仪表和测试拨号指标按以下标准：

- Dial gauges DIN 878 - 1973 德国标准
- Precision dial gauges DIN 879 - 1999  德国标准
- Dial test indicators DIN 2270 - 1985  德国标准
- Precision dial gauges ASME/ANSI B89.1.10M - 1987
- Dial gauges Norme française NF E 011-50 法国标准
- Dial test indicators Norme française XP E 11-053 : 2000 法国标准
- Dial gauges Japanese industrial standard JIS B 7503 - 1992 日本标准
- Dial gauges British standard BS 907-1965 英国标准
- Dial test indicators British standard BS 2795-1981 英国标准
- Dial gauges and test dial indicators, Australian standard AS 2103 澳大利亚标准
- Dial gauges (0.01 mm) (Korean standard) KS B 5206-1984 韩国标准
- Dial gauges (0.001 mm) (Korean standard) KS B 5207-1984 韩国标准
- Test dial indicators (Korean standard) KS B 5238-1976 韩国标准

The main display screen for dial gauges is divided in three sections, for three different types of dial gauges

5. MESCHR4W for the calibration of outside and inside micrometers, micrometer heads according to following standards:
MESCHR4W 为标定的内部和外部微米 (千分尺系列), 微米元首根据以下标准
- Micrometers DIN 863 - 1999 (part 1-4)  德国标准
- Outside micrometers (British standard) BS 870-1950 英国标准
- Inside micrometers (British standard) BS 959-1950 英国标准
- Depth micrometers (British standard) BS 6468-1984 英国标准
- Micrometer heads (British standard) BS 1734-1951 英国标准
- Micrometers (any type) Federal Specification (USA) GGG-C105 C-1987
- External micrometers, Australian standard AS 2102 澳大利亚标准
- Internal micrometers, Australian standard AS 2101 : 1978 澳大利亚标准

MESCHR4W main screen, although such measuring instruments are normal   calibrated using a set of reference block gauges

6. MESCHI4W for calibration of vernier calipers, depth gauges according to following standards:
MESCHI4W 为太阳能卡尺标定游标卡钳，•数显卡尺系列, •游标卡尺系列, •带表卡尺系列, •深度尺系列, •数显标尺系列 深度计，根据以下标准：

- Vernier calipers DIN 862 - 1988 卡尺德国标准
- Vernier calipers (metric) Australian standard AS 1984 - 1977 澳大利亚标准
- Vernier calipers British standard BS 887 卡尺英国标准
- Vernier calipers (metric) Norme Française NF E 11-091 法国标准

7. MESZTA4W for calibration of measuring tapes according to following standards:
MESZTA4W  校准测量录音带根据以下标准：
- Steel tapes DIN 865 and DIN 866 德国标准
- Steel tapes (British standard) BS 4372 英国标准

QMSOFT includes standards and procedures for calibration of following types of measuring instruments:
勤包括标准和程序校准下列类型的测量仪器:

卡尺
1 Absolute coolant proof caliper  防水防油数显卡尺
2 Absolute Digimatic caliper  数显卡尺
3 Absolute solar caliper 太阳能数显卡尺
4 Vernier caliper  游标卡尺
5 diamond Master vernier caliper  钻石形游标卡尺
6 dial caliper  带表卡尺
7 digimatic caliper 数显尖型夹钳卡尺
8 vernier caliper  带有拇指锁紧装置游标卡尺
9 digimatic carbon fiber caliper 数显碳纤卡尺
10 long jaw vernier caliper  长爪游标卡尺
11 digimatic caliper  带有尖型和标准型量爪数显卡尺
12 Vernier caliper 带有尖型和标准型量爪游标卡尺
13 offset caliper/offset centerline caliper  偏置卡尺/偏置中心线卡尺
14 point caliper 尖爪卡尺
15 blade type caliper  薄片游标卡尺
16 neck caliper/outside point caliper 颈套型游标卡尺/外点式游标卡尺
17 tube thickness caliper/swivel vernier caliper 管壁厚度卡尺
18 scribing caliper/digimatic snap caliper 划线卡尺/数显快速卡尺
19 back-jaw centerline caliper 背量爪式中心线卡尺
20 inside caliper 内径卡尺
21 absolute low force caliper 低测力卡尺
22 hook type vernier caliper 卡钳式游标卡尺
23 absolute digimatic depth gages 数显深度尺
24 vernier depth gages/dial depth gages  （带表）游标深度尺
25 extension bases/depth base attachment  加宽基面/深度基面附件
千分尺类:
1 Digimatic Micrometer 数显千分尺
2 quickmike Quickmike快速测量千分尺
3 outside micrometer 外径千分尺
4 quick-setting outside micrometers  快速设定型外径千分尺
5 spine micrometers 齿槽（花键）千分尺
6 point micrometers 尖头千分尺
7 Crimp Height Micrometers 夹钳式高度千分尺
8 v-anvil micrometers V砧（三勾、五勾）千分尺
9 tube micrometers 管壁千分尺
10 universal micrometers 万能千分尺
11 uni-mike “Uni-Mike”千分尺
12 sheet metal micrometers U型千分尺
13 balde micrometers 薄片千分尺
14 disk micrometers 盘式（公法线）千分尺
15 screw thread micrometers 螺纹千分尺
16 gear tooth micrometers 齿轮外径千分尺
17 can seam micrometers 罐型接缝千分尺
18 hub micrometers 轮毂千分尺
19 digit outside micrometers 数字外径千分尺
20 caliper type micrometers 卡尺型千分尺
21 digimatic micrometers  可调测力型数显千分尺
22 low force micrometers/digimatic bench micrometer
低测力千分尺/数显台式千分尺
23 snap meters/dial snap meters  带表千分尺（杠杆卡规）
24 indicating micrometers/outside micrometers  带表千分尺
25 limit micrometers  极限千分尺
26 optical flats/optical parallels  平行平晶/平面平晶
27 micrometer standards/standards for screw thread micrometers 
（普通、螺纹、V型测砧）千分尺校正杆
28  micrometer stands  千分尺尺座
29  groove micrometers  凹槽千分尺
30  depth micrometers 深度千分尺
31  borematic  孔径千分尺
32  digimatic holtest  数显三点内径千分尺
33  holtest  三点内径千分尺
34  inside micrometers  内径千分尺
35  digimatic tubular inside micrometers  数显接杆式内径千分尺
36  tubular inside micrometers  接杆式内径千分尺
37  micrometer heads  微分头

表类:
1 IDF series digimatic indicators IDF系列数显千分表/百分表
2 IDC series digimatic indicators IDC系列数显千分表/百分表
3 IDS series digimatic indicators IDS系列数显千分表/百分表
4 IDU series digimatic indicators IDU系列数显千分表/百分表
5 LGS series digimatic indicators LGS系列数显千分表/百分表
6 LGD,LGD-M Linear gages 光栅长度计
7 Dial indicators 1系列 1系列百分表/千分表
8 Dial indicators 2系列 2系列百分表/千分表
9 Dial indicators 3系列 3系列百分表/千分表
10 Dial indicators 4系列 4系列百分表/千分表
11 contact points  测头
12 magnetic stands 磁性支架/测量台
13 bore gages 内径表
14 dial bore gages  （粗糙表面）内径表
15 setting rings  环规
16 dial depth gages 深度表
17 thickness gages  厚度表
18 caliper gages  测径器
19 dial test indicators  杠杆百分表/千分表
20 accessories for dial test indicators  杠杆百分表/千分表附件
21 pocket type dial test indicators 袖珍型杠杆百分表/千分表
22 accessories  for pocket type dial test indicators  袖珍型杠杆百分表/千分表附件

高度尺类:
1 Linear Height 2D测量仪
2 QM-Hite 高精度数显高度尺
3 heightmatic 高精度高度尺
4 digimatic heitht gages 数显高度尺
5 digital counter type dial heitht gages  带表带计数器型高度尺
6 dial height gages  带表高度尺
7 vernier height gages  游标高度尺
8 scribers for height gages/accessories for height gages  高度尺划线头及高度尺附件

Example of calibration certificate
校准证书例子

The calibration certificate can be customized and printed in many different languages
校准证书可用许多不同的语言定制和印刷。

More information about update options for other length measurement machines can be found on (暂不可见) or (暂不可见)
如需更多其他长度测量仪器的最新消息，请访问： (暂不可见)或(暂不可见)

声明：本网站所收集的部分公开资料来源于互联网，转载的目的在于传递更多信息及用于网络分享，并不代表本站赞同其观点和对其真实性负责，也不构成任何其他建议。本站部分作品是由网友自主投稿和发布、编辑整理上传，对此类作品本站仅提供交流平台，不为其版权负责。如果您发现网站上所用视频、图片、文字如涉及作品版权问题，请第一时间告知，我们将根据您提供的证明材料确认版权并按国家标准支付稿酬或立即删除内容，以保证您的权益！联系电话：010-58612588 或 Email:editor@blueai.net.cn。